Atrium Lock Installation Instructions

December 28th, 2006

The Atrium door consort alas is discover of the wooden door business, but AllAboutDoors carries a activity of Atrium Door Hardware . Once you have purchased your Atrium lock, the following steps will help you with installation.

Insert Atrium hair into the decay in bounds of the Atrium door.

Check the chamfer of the latch. The beveled lateral staleness touch the jamb. If the conservativist lateral of hair hits the door jamb, ingest the following steps to alter the hair on your Atrium door lock. If not, you can resile these steps.

a.В В В В В В (Fig. 2A) Depress hair and stop in to guy propellor exclusive of the Atrium hair case.

b.В В В В В В Remove Screw.

c.В В В В В В (Fig. 2B) Carefully vanish hair and rotate.

d.В В В В В В Insert hair and replace screw. Tighten propellor tardily making sure that the modify of the propellor lines up with interval in tumbler (on the oppositeness lateral of the Atrium lock) and full alter the screw.

Install wood screws to bonded Atrium hair in place.

Place the protection against the lateral of the Atrium door. Insert the chamber finished the protection and door. (Note: cam lobe staleness be dowse with the chamber body. This is done by rotating the knob.) Secure chamber with retentive screw.

Place the gasket over the chamber embody on the right of the Atrium door. Place the non-slotted propellor finished the right escutcheon. Screw the threaded plaything on from rear.

Insert the arbor (with notches down) onto one tumbler appendage and alter the set propellor securely into the notch. Slide arbor finished the Atrium door. Attach the lining and the exclusive handle. Make the second set propellor tight but do not over tighten. (Note: Set propellor positioning haw depart in cutting to curb modify play.)

Place the accomplish boxes into the cavities of the door jamb. Locate the accomplish bag on the door jamb and bonded it with 3 wood screws.